Why Does My Rolls Royce Phantom Key Fob Not Work?
The Rolls-Royce Phantom conveys wealth and prestige. The large grille with waterfalls and classic upright dimensions are immediately recognized. It is also one of the world's most expensive cars.
A rolls royce phantom key fob can cease to function for a variety of reasons. The most common reason is a dead battery in the coin however, it could be caused by water damage or issues with the receiver module.
Battery
The coin battery is often the cause of the key fob of a Rolls-Royce Phantom not working. It is essential to remember that the key fob could also stop working due other reasons, such as water damage or worn buttons. Other reasons include signal interference, bad battery contacts, or keys that aren't paired which require reprogramming. Speak with a locksmith if the key fob isn't working. A locksmith can quickly diagnose the issue and provide a quick solution.
It is important to protect the battery from moisture and dirt to ensure that it remains fully functional. This is why it is recommended to always use a waterproof case for your key fob when driving. Additionally, it is advisable to remove the battery from the key fob before washing or cleaning it. The chip inside the key fob is sensitive to water and should not be exposed to soapy water or salty water. If the key fob is prone to be exposed to water, you can use electronic cleaner or isopropyl in order to prevent damage.
The battery pack of the Phantom EE is a unique power system that features a number technological innovations. This sets it apart from other luxury cars' traditional power systems. For instance the inclusion of a "power reserve dial" is now available on the dashboard that communicates the status of the car's power supply to the driver. This is a brand new design feature, which is designed to challenge the conventional car-related concepts and highlight the potential of alternative drivetrain technology.
One of the major advantages of this electric powertrain is that it permits for re-charging to take place without any physical connection between the car and its charging station. This is achieved through induction. Induction involves the transference of power between two surfaces: an induction mat on the ground, and a power-transfer unit under the battery pack.
The re-charging process takes place in two stages, with capacities of 13.5kW per phase and a total capacity of 71kWh. This makes it the biggest passenger car battery in the world. The Phantom EE also comes with three separate chargers that can be used for both single-phase and 3-phase charging, and also the regenerative brake.
Contacts
If your Rolls Royce Phantom key fob was not working, it could be due to a dead battery, worn buttons or other reasons. The issue is usually easy to resolve. You could also try reprogramming the key fob, or replacing the 12 Volt battery. If the issue persists the receiver module could have a fault. The remote keyless system and other electronic components onboard make use of the receiver module to communicate with each other using radio signals. If the receiver module becomes faulty, it will cease to communicate with the key fob or other electronic components onboard.
If you're having issues with the key fob, it is important to make sure the battery contacts are dry and clean. The metal clips that hold the button-cell battery in place and complete the circuit can be damaged by moist or dirty hands. If the battery is degraded you must replace it with a new one that is the same size and voltage. Before you assemble your key fob clean the contact surfaces using rubbing alcohol or electronic cleaner.
The key fob on the Rolls Royce Phantom has an electronic chip which sends signals to the remote keyless system module. The module converts the signals into commands that the car is able to understand. This is how the car knows you're looking to unlock doors or retract the "flying woman" ornament on the hood grille.
If the key fob has been exposed to water, immediately remove it from the vehicle and clean the electronic chip with isopropyl alcohol, or electronic cleaner. If you do not take this action the chip could become fried.
Water damage
The key fob comes with rubber seals that prevent the electronic chip from getting exposed. This makes it impervious to splashes and rain but not the kind of deep immersion that might occur when you drop your key in a puddle or drop it in the ocean. If the fob is damp, the chip may be damaged. You'll need to replace it.
Even if you didn't drop your key fob in the water, but it's been submerged by a dog that has been wet, washing machine or even soapy handwashing, don't worry because your roll royce phantom key fob might still be able to be salvaged. You can save money by following a few simple steps.
First, you must dismantle the key fob and thoroughly dry it. Remove the battery If you are able, and make use of compressed air to blow any moisture out of the key fob. After you have done this, let it dry for a few more days before you use it.
If your key fob is susceptible to soaking by moisture, it's a good idea to buy a waterproof case that can protect it against accidents. It's also an excellent idea to have an extra key in the case so that you don't have to wait for the fob to dry out.
In some cases the Rolls Royce Phantom key fob might stop working due to interference or a dead 12 volt battery. This issue is usually caused by objects, bad weather conditions, or transmitters operating at the same frequency as your remote.
Keep your key fob far away from these sources. If you can't avoid these sources of interference, you could try moving your car to a different location or reprogramming your remote. If you're unable to resolve the problem yourself, it's best that you seek out a professional technician. They will be able to identify the issue and determine whether it's an electrical or mechanical fault.
Reprogramming
The key fob on your Rolls Royce Phantom plays a crucial function in the security system of your vehicle. It transmits commands from the key fob to the receiver module that then sends the commands to the central locking mechanism of the vehicle. It can be a hassle and costly if the key fob ceases to function. There are a few simple ways to get your key fob working again.
The first thing to check is whether the battery inside the key fob is depleted. This is the most common reason for Phantom key fobs that are not locking or unlocking. There are usually indications of degeneration, for example a decreased range. Replace the battery with a fresh one with the same size, voltage and specification. Make sure that the clips that secure the batteries are not loose.
Water damage is another possible cause. The rubber seals on the key fob block water from reaching the electronic chip. However, when the seals are damaged by salted or soapy water, they may fail. If this happens, take the battery out and clean it using isopropyl alcohol or an electronic cleaner. After drying it completely, put it back into the fob.
If the key fob does not function after a few attempts, this could be a sign that the receiver module is faulty. The best method to determine this is to connect an electronic diagnostic scanner to the OBD port located under the dashboard of your Phantom. The scanner will request details about your vehicle, such as the year, model and engine type. You will also be asked to enter the code from your key fob.
Signal interference is a second possible reason. This could be caused by objects, weather conditions or transmitters that operate on the same frequency. The remote control works when you are near the Phantom but not at a distance. This can be fixed by removing any obstructions that might block the signal, or by moving the Phantom further away from the transmitters.